Series G 750
Potentiostat/Galvanostat/ZRA



Click the photo for an expanded view

Gamry Goes Green with the Series G 750 Potentiostat!

The Series G™ 750 Potentiostat/Galvanostat/ZRA is a research-grade electrochemical instrument that can be used in desktop or notebook computers.  It runs all Gamry software.

The Series G 750 is an excellent potentiostat for battery and fuel cell applications, electrodeposition studies, and corrosion measurement.

The Series G 750 meets the requirements for the Reduction of Hazardous Substances regulations of the European Union.  All of the electronic and mechanical components in the Series G750 are certified to be free of lead.

The Series G 750 is a higher current version of the Series G 300 Potentiostat.  Its output is a healthy ±750 mA at ±12 V.  This is especially useful when testing batteries, fuel cells, or making electrochemical measurements on samples with high corrosion rates.  Its 9 current ranges and post gain offset capability allow for a maximum resolution of 2.5 fA (gain=100).  16-bit D/A and A/D converters, along with four terminal current and voltage measurements, provide accurate results down to 1 µV resolution.  On-board electronics allow EIS scans from 10 µHz to 300 kHz, without the need for an external FRA or lock-in amplifier.  Extensive voltage and current channel filtering allows quiet measurements in very noisy environments.  A state machine insures accurate data acquisition timing, even when you run other applications on your computer.

For a complete assessment of the ability of the Series G 750 to perform EIS, see the Accuracy Contour Plot.

The Series G 750 is fully isolated from the computer's chassis ground, so it can work with earth grounded cells.  It offers both current interrupt and positive feedback IR compensation.  It works in the field, even when your computer is powered by a generator or a battery power inverter.   Extra I/O interfaces are available to control other equipment.

Click here for a PDF file of the Series G 750 brochure.

 

Standard Features
  • Isolation - Our potentiostats  were designed by electrochemists for the real world.  All Gamry potentiostats are fully isolated (electrically) from the host computer's chassis ground, allowing it to function properly with earth grounded cells.  Use the Series G 750 with autoclaves, mechanical stress apparatus, or pipeline probes for  accurate results.
       
  • Excellent Engineering - Gamry's modern electronic design and extensive use of surface mount technology packs tremendous capability onto a small area.  The performance and reliability of a potentiostat is not proportional to the volume or weight of the potentiostat!
     
  • Current Interrupt and Positive Feedback iR Compensation -  no need to rig your cells with supporting electrolyte or geometric modifications anymore, Gamry potentiostats and their controlling software use control loop algorithms to accurately measure and correct for uncompensated resistance.
     
  • Portability -  All Gamry potentiostats were designed to be used in the field as well as in a laboratory environment.  For a portable configuration, use the eStation Portable Electrochemistry System.
     
  • Auxiliary I/O - All Gamry potentiostats allow you to control additional equipment via additional I/O interfaces.

    external signal input
    analog voltage output
    analog current output
    auxiliary A/D input
    miscellaneous I/O connector:  this 15-pin connector provides a number of inputs and outputs to customize an electrochemical experiment, including a software-controlled analog output voltage, two fixed triggers, 4 software-controlled input triggers, and 4 software-controlled output triggers.
       
  • Power Supply - Potentiostats use the computer's power supply, eliminating the need for extra cables and clutter.
     
  • Scalability - Up to eight Series G 750 Potentiostats can be installed in one computer as a MultEchem System. 
      
  • Built-In EIS - On- board DDS to perform EIS from 10µHz to 300kHz.

  • Easy Installation - The Series G 750 is a Plug and Play Device, so installation is automated and easy.  A 16-page Quick-Start Guide gives illustrated step-by-step instructions to install both the Series G 750 and the Gamry software. 

 

Warranty

The Series G 750™ is protected by a  2-year factory service warranty. 

Specifications

Click here for detailed specifications of the Series G 750 Potentiostat.

Computer Requirements
  • 450 MHz Processor or faster.  
     
  • Two 25 cm (10 inch) PCI slots for each Potentiostat
  • 512 MB RAM   
  • 80 MB free hard disk space
  • Microsoft® Windows™ 2000 or XP

 

System Information

The Series G 750™ requires electrochemical software for specific electrochemical applications.  The Series G 750 is shipped with the  Gamry Framework™, Gamry Echem Analyst, a Hardware Operator's Manual, a Quick-Start Guide, a Universal Dummy Cell 3, one standard cell cable, and a Gamry Mouse Pad.  Special cables, cells and other accessories are available at extra cost. 

System Integration

Gamry Instruments can supply complete systems, including the above items and system software, installed in a desktop or notebook computer (eStation).  Custom computer configurations, software, training and installation are available by special order.   


Home | Products | App Notes | Sales | Contact | News | Support | Search

Batteries | Fuel Cells | Corrosion | Paints & Coatings | Physical Electrochemistry




Gamry Instruments © 1997-2008

Last revised on Wednesday, January 30, 2008